Test / Tools / Consumables

!
!
Larger picture

Pulling Lubricant

This water based lubricant is designed to aid the pulling of fibre cable into ducts & conduit,to prevent damage to the jacket.

Pulling lube 3.78Ltrs
Aid Pulling Of Fibre Into Ducts/Conduit.

Fibre Work Mat

This Large Black Work Mat is used to cover your work area prior to optical termination. The high contrast between the mat and the optical fibre make the finding of off-cuts easier to locate. 55cm x 35cm • Soft material as to not damage work top surface • Black in colour.

Safety Kit option. specifically designed for working safety with optical fibres.

Complete kit includes;

  • Polishing / Work Mat
  • Sharp bin
  • splinter removal tweezers
  • 10 bifurcated cleaning swipes with self contained alcohol dispensing tube
  • Pair of safety glasses.
crimp hex

Fibre Optic Crimp Tool (Hexagonal Crimp)

Hexagonal Crimp for use with Global Field Connectors.

Ratchet controlled tool frame fitted with a precision manufactured die set for hexagonal crimping of Fibre Optic Ferrules.

Splice Protectors

Buy 4 and get 1 free
Splice protectors are designed to maintain the strength & environmental stability of optical fibre cables after fusion splicing.
 
Components;
  • Heat shrinkable outer tube, hot melt fusion tube and stainless steel strength rod
  • Maintains optical properties of fibre
  • Provides strength and protection to optical fibre splices
  • Easy to use and install without damaging splice
  • Clear sleeve to allow visual location of splice prior to shrinking
  • Sealant protects splice 
  • 23mm, 45mm & 60mm clear sleeve. Pack of 100
  •  The colour set includes the colours designated in IEC 60304; Blue, orange, green,
    brown, Grey, White, Red, Black, Yellow, Violet, Rose and Aqua. 12 individual splices in a single bag.
Larger picture

Permanent Marker Pens

Water resistant permanent marker, bullet shaped tip.

Box of 10 units

Larger picture

Tombstone Marker Ties

Pack of 100, Natural

fib-anad

Loctite Quick Cure Anaerobic Adhesive


 

  • No electrical equipment required for curing
  • Quicker to use than heat-cure methods
  • Sets 1 - 5 minutes and is ready for polishing
  • 300+ terminations for 1 kit
  • No major health and safety risk
  • Only suitable for multimode applications

MultiClean™ pre-saturated wipes

  • Removes solder paste, flux residues, finger prints, uncured epoxy residues, light oils and grease
  • Economical
  • Water and alcohol mix
  • ESD-safe
  • No rip, no lint, heavy duty wipe
  • Unique “slam-shut” package for extra long service life
  • Pre-saturated Wipe Container 100 - 5” x 8.5” wipes

Product Information The MultiTask Surface Cleaner - MultiClean™ presaturated wipes provide fast and safe cleaning in almost any production environment. Using a strong, shred-proof disposable wipe saturated with high purity isopropyl alcohol and deionized water, it is well suited for cleaning medical devices, electronics and any surface-that requires hygienic grade cleaning. Versatile, it cleans most solder pastes and fluxes found in electronics production. It also cleans organic and ionic residues, light oils and other contaminants commonly found in the manufacture of medical devices. With excellent materials compatibility it is both safe and easy to use.

This product is great for cleaning off the gel from loose tube fibre cables and cleaning your hands before working with fibre.

We have also found it to work well when preparing fibre for Splicing. More cost effective than fibre cleaners.