Units in Stock.
New from Eloik 6 Motor Fusion Splicer.
6 motor splicer is composed by 2 driving motors, 2 aligning motors and 2 focusing motors, 4 motor splicer has only 2 driving motors and 2 aligning motors. The extra 2 focusing motors are installed on the optical lens, the motors will change the distance between the fibre and lens to make different image focusing. Once the fibre is placed, the motor will drive the lens closer or further away from the fibre so the fibre image will be displayed differently on the monitor, the software will process the image and auto ID the fibre type, for instance , users put SM fibre on the left holder of splicer, MM fibre on the right holder, after closing the cover , the auto focusing kicks in , based the reflection ratio the pre-set software will identifier the fibre type, splicer will give the warning that there are 2 different fibre about to make a fusion , then the users will understand maybe they are putting the wrong fibre, so they can change the fibre to SM-SM or MM-MM, it definitely helps the beginners to do the right fusion.
When purchased get on site training day at a location of your choice for 4 people "Free of Charge" Get trained by the UK Eloik distributor and also get 3 years warranty.