This unit been discontinued, the Gateway unit could be changed to a MKIII where the power can be supplied be the SKY Box or if only 2 outputs are used the Sky Q GTU is backwards compatible.
Mini Plugtop Switch Mode Power Supply, 100 to 240Vac Input Voltage, 6Vdc Output Voltage, 1A Output Current, 12W Output Power, Short-Circuit, Over Voltage, Over Load Protection Mode, UK, USA, European, Japan and Australia AC Input Plug Nationality, 120g, 2.1 x 5.5 x 12mm +ve Centre, UL, cUL, CE, GS, CB, PSE, BSMI, 3C Approved
Mini Plugtop Switch Mode Power Supply, 100 to 240vac Input Voltage, 12Vdc Output Voltage, 2.8A Output Current, 30W Output Power, Short-Circuit, Over Voltage, Over Load Protection Mode, UK, USA, European, Japan and Australia AC Input Plug Nationality, 120g, 2.1 x 5.5 x 12mm +ve Centre, UL, cUL, CE, GS, CB, PSE, BSMI, 3C Approved
1.2A Continuous
For MK3 Quad, Quatto GTU,DTT GTU, O2E & Expander
Mini Plugtop Switch Mode Power Supply, 100 to 240Vac Input Voltage, 20Vdc Output Voltage, 2.8A Output Current, 40W Output Power, Short-Circuit, Over Voltage, Over Load Protection Mode, UK, USA, European, Japan and Australia AC Input Plug Nationality, 120g, 2.1 x 5.5 x 12mm +ve Centre, UL, cUL, CE, GS, CB, PSE, BSMI, 3C Approved
Will fit all Global 20VDC devices.
Switch Mode Power Supply, 100 to 240Vac Input Voltage, 20Vdc Output Voltage, 2.0A Output Current, 40W Output Power, Short-Circuit, Over Voltage, Over Load Protection Mode, UK, 120g, 2.1 x 5.5 x 12mm +ve Centre, UL, cUL, CE, GS, CB, PSE, BSMI, 3C Approved. Complete with mains lead.
This unusual style 5A PSU offers the compact size of an in-line unit but with a wall mount lug so it is easy to fix in place on a wall, a board or even bolted on the back of an equipment rack.
Instead of the usual 2.1mm DC connection it offers a 4 way terminal connection so there’s no need for an additional junction box. It’s easy to make off composite cable ends to run directly to it and power up to 4 MDU LNB's or other 12V devices without soldering any leads.Output can be adjusted between 12 - 14V
This unit is supplied with a plug in kettle lead.
Unit measures approximately H165 x W55 x D40mm including top lug fixing.
See the 1 x 4 way connection Lead
A handy adaptor for powering 4 LNB's from one power supply.
At one end is a female connector to connect you power supply and at the other end are four 2.1mm DC male connector for you cameras.
Please remember that your power supply will need to be rated correctly to supply power to all four units.