The FWT-100 series is a handheld optical time domain reflectometer with a lightweight body and a specially designed back clip for easy carrying. The test dynamic is 20dB, and the minimum blind area is 3/10m. It is used to measure the breakpoint, length and loss of optical fibres. It has highly integrated functions such as OTDR, optical multimeter and intelligent optical link analysis (iOLA). Among them, the intelligent optical link analysis (iOLA) can realize mixed measurement of multiple pulse widths to improve measurement accuracy. It is equipped with LED flashlight lighting function; the U disk mode reads files in the U disk; connects to a computer to read files; and has a screenshot function to facilitate the preservation of data files.
3.5-inch colour LCD screen, specially designed UI interface, full touch operation, overall simplification, similar to the operation concept of mobile phones.

FWT-100-S5F Mini OTDR Fibre Live Test

Add to cart

Mini OTDR Active Fibre Live Test 1577nm, 20dB Optical Fibre Reflectometer Touch Screen OPM, VFL, OLS, iOLA Event Map Fibre Tester, Screensaver. SC/APC.


One of the advantages of the OTDR is the ability to generate a professional report of the measurements taken. The progressive development of fibre optics in the low-current system industry brings with it a greater awareness on the part of investors, who increasingly require the preparation of appropriate measurement documentation, even for relatively small projects. The free application OTDR Assistant for PC allows the reading of *.sor (Telcordia SR-4731 standard) measurement files generated by the OTDR for accurate analysis. It is possible to freely navigate through the reflectogram, zoom in on parts of it, or determine the attenuation of a given section or event using markers (2-point method, 4-point method, LSA method). The application also has an iOLA plugin for reading the *tor files generated when the results of the iOLA module are saved.
The saved files and the above-mentioned software allow the generation of measurement reports in *.pdf or *.xls format. The Measurement Report Wizard gives you a choice as to the format and content of the report. You can choose between a one-page document containing basic information, or advanced reports including such data as a reflectogram, event tables, or graphical representation of the measured link.



Mini OTDR Active Fibre Live Test 1577nm 20dB Optical Fibre Reflectometer Touch Screen OPM VFL OLS Fibre Tester SC/APC Connector.

iOLM (Intelligent Optical Link Mapper). Simplify OTDR tests while optimizing.

Description:

Model: FWT-100 S5F
Dynamic Range: 20dB
Test Range:100m~80km
Wavelength: 1577(±20nm)
OTDR/OLS Connector: SC/APC
Pulse Width: 5ns~20μs
Measurement Time: 5s~180s
Measurement Mode: Real time, average, automatic
Attenuation Dead Zone: 12m
Event Dead Zone: <3m
Sampling Point: 8000
Input Light Detection: Support
Maximum allowable power for light test:
1270nm<10dBm
1310nm<10dBm
1490nm<10dBm

OPM: +26~-50dBm, 850/1300/1310/1490/1550/1625nm, 2.5mm universal connector

VFL: 10mW, 2.5mm universal connector

LCD: 3.5-inch high-definition touch screen
Type-C Cable: Type-C x1
Self-calibration Function: Support
LED Light: Support
Working Temperature: 0℃~50℃
Storage Temperature: -20℃~70℃
Relative Humidity: <90%
Size(H*W*D): 117mm*70mm*33mm
Weight: 217g


iOLM is powered by intelligent algorithms that can adapt to the context. iOLM dynamically locates and identifies all network components and faults with maximal resolution— all at the push of one button.



It is recommended that a Launch Cable is used for better results.

  • Related Products